Your home is one of your investments, and it’s the place you should feel most comfortable. If your floors are looking shabby, then it’s time for a makeover!
The best way to give your floors a facelift is through floor sanding and polishing near me professionals. You’ll have an easier time doing this project if you’re already familiar with how to use tools like sanders and buffers, but don’t worry—we’ve got you covered there too!
Sanding or Refinishing?
Sanding is a cheaper option, but if you’re going to sand your floors, it’s important to seal them afterwards. Sanding also doesn’t result in as smooth a finish as refinishing does.
Refinishing is more time-consuming and expensive than sanding, but it offers more benefits: it can be used on any type of wood flooring (including hardwood, bamboo and laminate), while sanding only works with softwoods like pine or fir; refinishing involves stripping off old varnish or paint so that you’re getting a bare surface back again–this means there’s no need for sealing afterwards; finally, refinishing gives you total control over how much glossiness or texture you want on your floor–you don’t have this choice when doing just one coat of varnish over an existing finish!
Preparation for Sanding and Polishing
Before you begin, it’s important to prepare your room. To do so, you’ll need to remove all furniture from the flooring area and cover it with protective sheets (if possible).
If there are any carpets or rugs in the same room as your hardwood floors, be sure to cover them with protective sheets as well. Remove any electrical outlets that may be near your work area by wrapping them with tape or covering them with plastic bags filled with sand or gravel–this will prevent accidental contact and help keep dust from getting into their workings.
Finally, protect both yourself and your walls by wearing long sleeves made of cotton or polyester material; these materials won’t catch fire when exposed directly to heat sources like a propane torch used for polishing wood flooring!
What to Use When Sanding Your Floors
When you’re sanding your floors, it’s important to know what grits of sandpaper to use. The higher the number, the coarser the grit. For example, 60-grit sandpaper is much coarser than 40-grit sandpaper–it won’t leave scratches in your floor after being used on it.
On the other hand, if you want a smooth finish when polishing your floors (like with polyurethane or lacquer), then it would make sense for you to use lower grits like 30 or 40 so that there aren’t any visible scratches left behind after applying these finishes onto them.
The general rule is this: if you want a smoother finish on your floors after they’ve been polished out with polyurethane or lacquer (or even waxes), then start off by using lower grits like 30 or 40; whereas if creating textured effects such as wood grain patterns are more desirable for creating visual interest within an otherwise plain room design scheme -and therefore requiring something more coarsely textured–then start off using higher grits such as 50+, depending upon how deep into detail those patterns need go before reaching their final stages.
How to Sand and Polish Your Floors Step by Step
Sanding and polishing your floors is an important step in making them look great, but it can be a daunting task for the uninitiated. Fortunately, we’ve got you covered with these tips and tricks to help you get started:
- First things first: what do you need? The most important thing is to make sure that you have all of the necessary tools at hand before starting any project–and sanding/polishing floors is no exception! You’ll need some kind of sander (either electric or manual), an orbital sander attachment for your vacuum cleaner (if applicable), WD-40 or similar lubricant for protecting against scratches during the process and clean rags for wiping away dust particles as they appear on the surface being worked on.
- Preparing Your Floors For Sanding And Polishing: There are two main ways of preparing surfaces before applying any type of coating: stripping off old finishes using chemicals like acetone while protecting surrounding areas from overspray by covering them with plastic sheeting; scraping off loose material using metal scrapers made specifically for this purpose.
After doing this work yourself once or twice then it becomes much easier going forward because now we know what needs doing beforehand so there will be less surprises later on down road when trying something new technique wise like trying out new colors combinations together etc.
Conclusion
We hope you now have a better understanding of how to find and get the best floor sanding and polishing near me. This is a great way to breathe new life into an old floor or make it look like new again. Make sure to choose the right company like us – Prestige Floors. We aim to be the best in the industry and we always strive for excellence in all flooring services that we do.