Floor Sanding Melbourne

Thinking DIY Floor Sanding: What to Watch Out For

How to sand wooden floors is one of the most frequently requested inquiries we receive. We at Prestige Floors, Floor Sanding Melbourne experts have sanded more than our fair share of floors and floorboards and understand how intimidating the task ahead can feel.

As one of the most well-known Timber Floor Sanding Melbourne experts, we’ve heard about pretty much every sanding blunder imaginable. We recently published a blog post that demonstrated how to sand and finish a hardwood floor. In this article, we’ll show you how to prevent some of the most typical sanding blunders.

What to Avoid When Sanding a Floor at Home: What to Watch Out For

A Recap of the Basics

We went into some detail on how to sand and finish a hardwood floor in our previous blog post. Here’s a quick rundown:

  1. Rent a floor sander and a portable edge sander from a rental store.
  1. Take everything out of the room, including the curtains and rugs. Plastic and duct tape should be used to cover electrical outlets, light fixtures, and anything else left in the room. Open the windows and doors.
  1. Rough sanding will be done in two stages: 24 grit and 40 grit, diagonally. 80 grit will be used for medium sanding. 100-120 grit sandpaper will be used for fine sanding. Starting in a corner and pushing the sander diagonally is how rough and medium sanding is done. When starting or stopping, remember to tilt the sander so that it does not make contact with the floor. I’ll go into more detail about this later.
  1. Finish the floor to your liking, but make sure to follow the manufacturer’s guidelines.

Common Problems

Obviously, the idea is for your floor to have a professional finish. While hiring a professional is usually the best option, anyone who wants to do it themselves has access to the same high-quality finishes that experts have. Professional sanding equipment, on the other hand, is of greater quality and balance, and you will not have access to it. This implies you can’t sand and make mistakes.

How to Stay Away from Mistakes

Sanding your floor as the pros do is by far the most reliable way to avoid mistakes. When it comes to fine sanding, you aren’t removing much wood, you’re essentially smoothing off the surface’s top layer.

If you make any sanding mistakes, the coating will magnify and enhance them. The most typical sanding mistake made by beginners is to disregard the warning that you must always lean our professional Timber Floor Sanding Melbourne service experts onto the back wheels until there is no contact between the sanding belt and the floor before turning it on or off.

 Summing up,

Do you live on a property with a lot of traffic? Or do you simply want your flooring to appear newer and more appealing? If you responded yes to any of these questions, get in touch with our Timber Floor Sanding Melbourne specialist, who explains how to tell whether it’s time for a sand and finish down below. Get in touch with Floor Sanding Melbourne right away!