Floor Sanding is not at all DIY job, at any rate just in the event that you need to know how to sand a wooden floor I will give you some secret tips for sanding and re-establishing wooden ground surface. But remember sanding floors yourself won’t bring perfection, at any point you get stuck up at the time you need to hire some professionals to do the perfect floor sanding Melbourne.
An incredible difference you can see by doing floor sanding with skilled experts. It is amazing the distinction a quality floor sanding Melbourne can make to a story and the general look of a room. A few people take the DIY course though others hand it over to a floor sanding Services. Whichever way you’re considering going these simple to take after tips will guarantee you.
What Floor Sanding machinery comprise of?
It comprises of two sanding machineries:
- One for Edges.
- For main Areas
Some floor sanding companies to save some cost use poor quality sanding machines which end up in dust everywhere. And will cause imperfections in the sanding process. Constant changing of sanding paper is required. Also, it’s necessary to ask floor sanding company about the process and sanding machinery available.
There are different types of sanders available in Australia.
- Orbital Sanders: It highlights a flat base, called a platen, which works with a roundabout or orbital activity. It’s light and simple to use on mortar, timber or already painted surfaces.
- Detail Sanders: Best for hard to reach spaces and used for very fine and precise sanding and are of different types even at variable speeds.
- Belt Sanders: These are used for heavy duty sanding. They have more power and are used for the leveling of crooked surfaces such as smoothening the surface of the timber.
Process before Sanding:
Make sure that you have punched nails down to 1/8th Inch below the floor boards, if not done properly sandpaper will get damaged. Fill out the gaps before starting. There are different types of sand paper for the different process you can use mainly there are three of them 40,80 and 120 grit sizes but some professional Floor sanding experts use seven types of sanders.
While sanding.
- Step 1: Trim till the line
- Step 2: Level the uneven
- Step 3: Use good and professional Technique
- Step 4: Avoid making grooves.
- Step 5: After sanding always prefer to trim
- Step 6: Don’t wreck the plywood with belt sanders. Instead, mark a pencil at the starting point of timber while edging flushes