Floor Polishing Melbourne

Keep These Things In Mind If You Are Planning For Wood Polishing

Refinishing—the process of completely sanding floors to provide a new surface finish—is expensive and should only be done every few decades. However, polishing your floors with a product designed exclusively for them is a simple and inexpensive way to restore shine, even out irregularities, and extend the life of your lovely hardwood. To obtain your chosen look, all you need is a flat-head mop with a microfiber cleaning pad and industrial wood floor polish in low- or high-gloss sheens. Take expert advice regarding Floor Polishing Melbourne if you are planning for any floor polishing project.

  • Try testing the polish on wood floors

However, the finish of your flooring will determine whether or not you should polish them. Polish is beneficial to floors with a protective surface—a waterproof barrier like urethane, for example—but wax is required for floors with penetrating finishes like tung oil or untreated wood. Using the incorrect product can result in a variety of issues, including making floors overly slippery, dulling the sheen, and preventing effective refinishing in the future.

If you’re not sure what type of finish your floor has, scrape a small amount off with a sharp knife blade in an inconspicuous spot. Your floor most likely has a penetrating finish if the finish is smeared but no clear material is scraped up. Stop here; these wood floors should only be waxed, not polished.

Your flooring most likely has a surface finish if you observe a clear material. These wood floors are safe to polish. However, before tackling the entire floor, test the polish in a tiny hidden or inconspicuous area on the wood.

  • Clear and clean your wood

Clean the floor thoroughly to eliminate dust and filth after emptying the room and removing as much furniture as possible. Sweep or vacuum the floor, then mop with a commercial wood floor cleaner or a quarter-cup of dish soap and a gallon of warm water to remove any remaining filth. To eliminate any cleaner residue, mop the floors one last time with a clean, water-dampened mop. Using a soft, clean towel, completely dry the dish.

  • Polish the wood until you see the shine

Begin by pouring a little S-shaped amount of wood floor polish onto the floor in a back corner of the room, designing a trail that will lead you to an escape.

Work the solution back and forth in the direction of the wood grain using a flat-surface mop, flattening out any air bubbles. To best regulate the quantity of polish you’ve applied, work in small sections (approximately three to five feet broad in either direction).

  • Wait for at least one day to settle down the polish

Begin by pouring a little S-shaped amount of wood floor polish onto the floor in a back corner of the room, designing a trail that will lead you to an escape.

Work the solution back and forth in the direction of the wood grain using a flat-surface mop, flattening out any air bubbles. To best regulate the quantity of polish you’ve applied, work in small sections (approximately three to five feet broad in either direction).

Consult prestige floors to avail of the high-standard floor polishing service, call us today for Floor Sanding Melbourne quotes.