How To Achieve A Professional Finish With Timber Floor Sanding And Polishing?
There are many reasons why you might want to sand and polish your timber floor. For example, if you’ve just had it installed or it’s been refurbished, giving it a coat of polyurethane will protect the wood and make it look shinier.
Alternatively, if your floor has become dull with wear or scratches from pets or children running around on it all day long, timber floor sanding and polishing Melbourne will restore its original vibrancy and shine. But whichever reason you have for wanting to refinish your timber flooring, there are steps that need to be followed so that you achieve professional results.
Wear protective clothing and ensure adequate ventilation.
- Wear protective clothing and ensure adequate ventilation.
- Wear a dust mask, safety glasses and ear protection.
- Wear long sleeved shirt & pants to protect your skin from splinters of wood, dust & debris that can get into your eyes & ears.
- Wear gloves to protect your hands from rough surfaces when lifting heavy items or carrying them around (e.g., floor boards).
Before you start, vacuum your timber floor thoroughly.
When it comes to timber floor sanding and polishing, the first step is always the same: vacuum your timber floor thoroughly.
The purpose of vacuuming is twofold: firstly, it removes dust and debris from the surface of your timber; secondly, it helps lift any stubborn dirt that has become lodged in between boards over time. For best results use a vacuum cleaner with soft brush attachment for this job (this will prevent swirl marks). When switching between attachments make sure its turned off when you switch from hard bristles back into soft ones!
The reason for this is because if there are any loose particles on top of your timber they’ll get sucked up by mistake which could cause scratches in future stages when trying to remove them again!
Inspect the floor for surface damage and minor cracks and holes.
Before you start sanding and polishing, it’s important to inspect the floor for surface damage and minor cracks and holes. If there are any areas of damage, they need to be repaired before you continue with your project.
You can use a filler such as wood putty or epoxy resin filler to repair cracks or holes in timber floors. Place some of this material over the area where there is damage on your floor then smooth it out using something like an old paint brush or even just your finger tips.
The key thing here is not to use too much pressure when smoothing out these materials as doing so can cause them to crack or chip off later on when you’re sanding down around them during this process!
If you’re looking our timber floor sanding and polishing Melbourne, our guide will help you achieve a professional finish. We’ve covered how to prepare the surface and what tools are needed for each step in the process. Prestige Floors is dedicated to providing superior knowledge, quality, and service to you throughout the whole flooring process and our experienced experts can handle any kind of flooring problem with the right technique and latest tools.