Floor Polishing Melbourne and Sanding Melbourne

Floor Polishing Melbourne – Some Common mistakes to avoid

Following are the standard Floor Polishing Melbourne mistakes that you must avoid.

Let’s explore together!

Not Sanding Enough

There’s no getting around it – sanding your floors is arduous work and genuinely tiring. At the point when you first beginning sanding you’ll in a flash observe a high contrast in your floor yet once you’ve expelled the vast majority of the varnish and earth progress will appear to be so much slower.

For the most part, this is down to the sections of flooring not being totally level that implies the drum of the floor sanding machine won’t have the option to arrive at all territories of the wood planks in one go.

Timber Floor Polishing Melbourne

This implies you’ll regularly be left with shadows either at the edges of the wood planks or in the flooring.

Even though you’re most likely reasoning that your floors look adequate to call them completed, attempt to oppose the compulsion to stop now – it’ll have a significant effect, guarantee!

You have to sand your wood planks until they look fresh out of the plastic new, regardless of whether you’re recolouring the sheets. It’s what will affect your completed floor looking astounding and expert or standard and unprofessional.

Not Sanding Diagonally

We didn’t sand corner to corner the initial scarcely any occasions we sanded our floors yet we did in our new home, and we would suggest you do the same.

It makes sanding your floors snappier as it’ll level out your planks of flooring making sanding faster as you won’t be left with territories of the wood planks that are hard to reach.

Timber Floor Sanding and Polishing Melbourne

Utilizing The Wrong Grit Sandpaper

The by a wide margin most significant slip-up I see isn’t utilizing the correct coarseness paper. I can’t pressure enough how significant it is, and you truly won’t help yourselves out in case you begin to sand with paper that is excessively fine.

What coarseness you start with will rely upon what your sections of flooring resemble. In case they’ve been sanded previously and need a revival you’ll have the option to begin sanding with better paper yet, as a rule, you’ll need to begin with a considerably more coarse paper than you anticipate.

Sanding The Edges

Sanding the edges of your room is complete agony. It’s backbreaking work as you’ll wind up floating over the edging sander for a considerable length of time. Fortunately, you can sand the edges somewhat not exactly the primary surface – actually, it’s a smart thought to do as such!

Prestige Floor Polishing Melbourne

You should wrap up the central zone with 120 coarseness paper yet for the edges, and we’d suggest you stop at 80 coarseness. It’ll despite everything be more than sufficiently smooth and will spare you time.

It is conceivable to sand with a fine coarseness, yet the issue is that you can rapidly wind up with singe blemishes on your floor which can create in light of the high warmth and grating produced between the sandpaper and your floor.

It’s better to hire professionals of Floor Sanding Melbourne to avoid any kind of mistakes.

Prestige Floors is there to help you with any kind of flooring issue.

So reach us right now!