You’ve finally decided to sand your hardwood floors. You’ve made sure they’re clean and dry, you’ve bought the right tools, and you know how long it’ll take to complete your task. But there’s one more thing you can do before you begin: Get organized! Although this might seem like an overly cautious precaution, it’s actually a good idea, particularly if you’re working alone or don’t have much experience with floor sanding Melbourne services. The last thing you want is for things to get messy or confusing halfway through—which would be easy enough to happen if everything isn’t laid out properly beforehand. So before we get into specifics about how best to approach this particular project (yes!), here are three general things that will help ensure success:
Preparing The Room
Here are some things to consider before you start sanding:
- Remove all furniture and other items from the room. If you have any large pieces of furniture, consider removing them entirely from the house so that they are not damaged by dust particles.
- Cover your furniture with a sheet or tablecloth when possible. This will help keep dust off of it until it can be cleaned off later on in the process.
- Make sure there is adequate ventilation in your workspace. The best way to do this is through open windows or a ceiling fan (make sure there are no electrical cords hanging near where you will be working). If this isn’t an option for your space, then use a respirator mask over the mouth and nose area; make sure any pets are out of the way as well!
- Make sure there is enough lighting so that you can see what you’re doing clearly—and make sure it won’t cause glare or reflection on your work surface like sunlight, or overhead lights would do while using power tools such as sanders!
Preparing Yourself
Before you begin, make sure to take the proper precautions. Wear a dust mask and safety goggles, as well as earplugs. Long sleeves and pants are recommended, along with shoes that cover your feet completely (no sneakers). A hat is also suggested to keep dust out of your hair.
Preparing Your Hardwood Floor
Before you begin, make sure your room is prepared for the job. You’ll need to:
- Remove any furniture from the area, aside from small items like lamps and coffee tables (you can cover these with plastic sheeting).
- Cover or remove any carpets in the room; it’s okay if they’re glued down—you just don’t want them getting caught up in the sanding process.
- Remove all pictures and wall hangings (again, you can use plastic sheets). If these are screwed into the wall, consider using a piece of plywood to protect them while still allowing access to screwdrivers or hand tools.
Sanding Timber Floors Can Be An Exciting And Rewarding Experience
Sanding timber floors can be an exciting and rewarding experience. As you progress through the various stages of floor Sanding in Melbourne services, you will see a transformation in your floor as the old finish is removed and the wood starts to shine. The whole process is not without its challenges, however. It can be messy, dirty, risky, and dangerous, or it can be tiring and boring – depending on how much effort you put into it!
The good news is that there are some things you can do ahead of time to make the process less stressful for yourself and your family members who may have to deal with potential messes or poor air quality while working in confined spaces with power tools. We’re going to give our top three tips below as well as some general advice for sanding hardwood floors safely:
Conclusion
floor sanding Melbourne services is a good way to bring your old home back to life. But before you can begin sanding, there are some things that need to be done first. At the top of the list is finding out how much work needs to be done on the floor and how long it will take.