A fresh coat of paint can make any room look like new. But what if your floor is already painted and it’s starting to show its age?
If you want your house to look its best, it’s time to consider Timber Floor Sanding Melbourne for your floors. In this article, we’ll discuss why you might want to do that and when the best time to start is.
Water Damage
Water damage can cause a number of problems. It can cause warping and swelling, discolouration and even rot.
The glue in your flooring may also break down as a result of water damage. If you’re unsure whether or not your floor is damaged by water, inspect it for any signs of warping or swelling.
If there is any discolouration to your flooring, this may be an indication that there has been some form of moisture present at one time or another in that particular area of the room that’s why you require Timber Floor Sanding Melbourne.
You’ll want to get rid of all the furniture from the damaged area so that you can see how much damage has occurred since it was last cleaned up properly (if ever).
Make sure that there are no cords lying around where they could potentially come into contact with any moisture from underneath; this would cause further issues when trying to clean up afterwards, as well as make things unsafe for anyone walking through those areas later on in life.
Fading
Fading is the gradual lightening of your floors over time. It can have a number of causes, but it most often occurs when you use a cleaning product that contains bleach.
Over time, the bleach will react with the wood and cause it to lose colour.
The good news is that fading can be prevented by using non-bleach-based cleaning products on your floors.
The bad news is that if you’ve already got some fading going on, there are some home remedies you might want to try before investing in professional restoration services—and even then, professional work may not be necessary!
Gouges and Chipping
If you have gouges or chipping in your floor, it’s best to fill them. The filling is a temporary solution that can be fixed by sanding and re-staining later.
To do this, you’ll need a stain that matches the colour of your floors. Then, apply the stain with a brush or roller and let it dry for about 15 minutes before wiping off any excess with a clean rag.
Once the filler has dried properly (about 24 hours), you can begin sanding around the gouges using an orbital sander with fine grit paper (80-grit) until they disappear completely under the stain’s surface.
Scratches
- Sanding and refinishing the wood is often necessary to bring it back to life.
- The older the floorboards are, the more likely they are to get scratched.
- Scratches can be caused by moving furniture on your hardwood floors or even by walking across them with shoes with sharp edges (like heels).
- In order for a scratch to occur, there has to be a moved between the two surfaces that meet. A large enough force applied along a flat surface will create this type of movement, which results in a scratch.
Conclusion
In the end, there is no one-size-fits-all answer to when you should sand or restore your floors. The decision is about weighing the cost of doing it yourself is not worth hence hiring Timber Floor Sanding Melbourne professionals is worth it to you. Hiring Prestige Floors is a fantastic alternative if you’re trying to transform your timber floors.
We offer a range of services to help you get the look you desire and are experts in Melbourne timber floor sanding and polishing. We have a wealth of knowledge and can offer a number of suggestions and guidance to help you get the most out of your floors.