Floor Sanding Melbourne

The Does and Don’ts of Floor Sanding: How to Get a Smooth Finish

Floor Sanding is the process of removing the top layer of your flooring to expose a smooth surface. This can be done on wood, concrete, or vinyl floors. Floor Sanding Melbourne is often used to prepare a surface for refinishing or staining. It’s important to note that floor sanding is a renovation project, and it should only be attempted if you’re comfortable with DIY projects and have some experience with carpentry. Floor sanding can be a messy process, so it’s important to take precautions to protect your belongings and keep the workspace clean.

What Are The Benefits of Floor Sanding?

Floor sanding is an important step in refinishing your floors. By removing the old finish and sanding down the wood to create a smooth surface, you create a surface that is ready for your chosen finish. Floor sanding also opens up the wood grain, which allows the finish to penetrate more deeply, creating a longer-lasting finish.

What Is The Dos And Don’ts Of Floor Sanding?

Before you start sanding, there are a few things you should keep in mind. First, always read the manufacturer’s instructions carefully. Second, work in a well-ventilated area and wear a dust mask to avoid breathing in any particles. Third, start with the coarsest sandpaper you have and work your way up to the finest. Finally, always sand in the direction of the wood grain. When it comes to sanding, there are a few dos and don’ts to keep in mind. Here are the most important ones:


-Work in a well-ventilated area

-Wear a dust mask

-Start with the coarsest sandpaper and work your way up to the finest

-Sand in the direction of the wood grain


-Sand against the wood grain, as this can damage the surface

-Sand if the finish is still wet

Floor Sanding Melbourne

How to Choose The Right Floor Sanders?

When it comes to floor sanders, you have a few different options to choose from. The most common are belt sanders, orbital sanders and drum sanders. Drum sanders give you the smoothest finish, but they can be a bit more difficult to use. Belt sanders are the next best option and are perfect for removing paint or varnish from floors. Orbital sanders are the least powerful but also the easiest to use. So, how do you decide which sander is right for your project? It depends on the condition of your floor, the type of finish you want and your own level of experience. If you’re not sure which sander to choose, our Floor Sanding Melbourne expert team at Prestige Floors can help you make the right decision.

How to Care for Your Floors After Sanding

After sanding your floors, you’ll need to take some extra care to keep them looking good for years to come. Here are a few tips:

– Keep furniture and other items off the floor for at least 48 hours. This will allow the finish to cure properly and increase durability.

– When you do move furniture back in, place pads or coasters under the feet to avoid scratches and damage.

– Vacuum regularly, at least once a week. Be sure to use a soft brush attachment or no attachment at all to avoid scratching the floor.

– Avoid using water or any cleaning products that contain ammonia on your floor. These can dull the finish and damage the wood.


Floor sanding is a great way to give your floors a fresh start and a smooth finish. By following the dos and don’ts of floor sanding, you can ensure that your floors are sanded properly and look their best.